Articles in this category Interactive Whiteboards and Software This guide will take you through the calibration of the interactive boards found in most classrooms. (Calibration can only be done when connected to the board) Firstly, locate the small upward poi... Projector not showing the same as the Computer Monitor? Sometimes a computer does not show the same image on the projector as on the monitor. This is usually the result of a cable previously having been unplugged. For Desktop PC's: This is quick and easy... Locked Projector / Asking For Password After a power outage, projectors may lock and require a password. For NEC projectors, the password is entered using the arrow buttons on the remote and is: Menu, ↑,→,↓,←, Enter For No sound in B6 / B8? In these rooms the sound comes out of speakers built in to the IWB. On the side of the board just above the pen holder there will be a button. If the button is glowing red it means the sound is off o... Connecting to a Classroom Dock Each classroom has one of two dock types. Both will use the same connector (UDB type C) Plug the USB cable into either USB port on the left side of you Zenbook laptop. Connecting to Wireless Projection in Halls Wireless Projection dongles are present in CHS Dining Hall, CHS Assembly Hall, CLA Assembly Hall, and CCVI Common Room. Connecting to these wireless dongles will allow Staff, Students, and Guest Spea...